STC Boston Competitions - Directions to Judging Events

[an error occurred while processing this directive] [an error occurred while processing this directive]

Directions to Judging Events

The directions to the judging events are as follows:

Online Communication Orientation

The Online Communication orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Online Communication and Technical Art Consensus Judging

The Online Communication and Technical Art consensus judging sessions will be at Hewlett-Packard Co., 110 Spit Brook Rd., Nashua, NH.

From the South:

  1. Take Route 3 North into New Hampshire.
  2. Take Exit 1. At the end of the exit, take a left onto Spit Brook Rd.
  3. Go through one set of lights and bear right at the second set of lights. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

From the North:

  1. Take the Frederick E. Everett Turnpike south.
  2. Take Exit 1. At the bottom of the exit, take a right.
  3. Go to the next set of lights and bear right. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

Technical Art Orientation

The Technical Art orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Technical Publications Orientation

The Technical Publications and Technical Art orientation sessions will be at Parametric Technology Corp., 140 Kendrick St., Needham, Mass.

From the North:

  1. Take Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

From the South:

  1. Take Route 128 North to Exit 18.
  2. Take a right onto Great Plain Avenue.
  3. Turn right onto Greendale Avenue.
  4. Turn right onto Kendrick Street.

From the East or West:

  1. Take the Massachusetts Turnpike to Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a Left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

Technical Publications Consensus Judging

The Technical Publicationsconsensus judging sessions will be at Middlesex Community College, 590 Springs Rd., Bedford, Mass.

From Route 128 South:

  1. Take Route 3 North to Exit 27 (Bedford/Concord Road, Billerica).
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.

From Route 128 North:

  1. Take Exit 31B (Routes 4/225) into Bedford.
  2. Follow Great Road until you pass Bedford Shopping Center on your right.
  3. Take the first right immediately past the shopping center onto Hillside Ave. toward the VA Medical Center (becomes Springs Rd.).
  4. Pass through VA Hospital grounds, continuing on Springs Road for just under a mile.
  5. The entrance to Middlesex Community College is on the right. Follow the signs to visitor parking.

From Route 3 South:

  1. Take Exit 27 (Bedford/Concord Road/Billerica)
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.
[an error occurred while processing this directive] STC Boston Competitions - Directions to Judging Events

[an error occurred while processing this directive] [an error occurred while processing this directive]

Directions to Judging Events

The directions to the judging events are as follows:

Online Communication Orientation

The Online Communication orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Online Communication and Technical Art Consensus Judging

The Online Communication and Technical Art consensus judging sessions will be at Hewlett-Packard Co., 110 Spit Brook Rd., Nashua, NH.

From the South:

  1. Take Route 3 North into New Hampshire.
  2. Take Exit 1. At the end of the exit, take a left onto Spit Brook Rd.
  3. Go through one set of lights and bear right at the second set of lights. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

From the North:

  1. Take the Frederick E. Everett Turnpike south.
  2. Take Exit 1. At the bottom of the exit, take a right.
  3. Go to the next set of lights and bear right. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

Technical Art Orientation

The Technical Art orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Technical Publications Orientation

The Technical Publications and Technical Art orientation sessions will be at Parametric Technology Corp., 140 Kendrick St., Needham, Mass.

From the North:

  1. Take Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

From the South:

  1. Take Route 128 North to Exit 18.
  2. Take a right onto Great Plain Avenue.
  3. Turn right onto Greendale Avenue.
  4. Turn right onto Kendrick Street.

From the East or West:

  1. Take the Massachusetts Turnpike to Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a Left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

Technical Publications Consensus Judging

The Technical Publicationsconsensus judging sessions will be at Middlesex Community College, 590 Springs Rd., Bedford, Mass.

From Route 128 South:

  1. Take Route 3 North to Exit 27 (Bedford/Concord Road, Billerica).
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.

From Route 128 North:

  1. Take Exit 31B (Routes 4/225) into Bedford.
  2. Follow Great Road until you pass Bedford Shopping Center on your right.
  3. Take the first right immediately past the shopping center onto Hillside Ave. toward the VA Medical Center (becomes Springs Rd.).
  4. Pass through VA Hospital grounds, continuing on Springs Road for just under a mile.
  5. The entrance to Middlesex Community College is on the right. Follow the signs to visitor parking.

From Route 3 South:

  1. Take Exit 27 (Bedford/Concord Road/Billerica)
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.
[an error occurred while processing this directive]

Directions to Judging Events

The directions to the judging events are as follows:

Online Communication Orientation

The Online Communication orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Online Communication and Technical Art Consensus Judging

The Online Communication and Technical Art consensus judging sessions will be at Hewlett-Packard Co., 110 Spit Brook Rd., Nashua, NH.

From the South:

  1. Take Route 3 North into New Hampshire.
  2. Take Exit 1. At the end of the exit, take a left onto Spit Brook Rd.
  3. Go through one set of lights and bear right at the second set of lights. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

From the North:

  1. Take the Frederick E. Everett Turnpike south.
  2. Take Exit 1. At the bottom of the exit, take a right.
  3. Go to the next set of lights and bear right. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

Technical Art Orientation

The Technical Art orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Technical Publications Orientation

The Technical Publications and Technical Art orientation sessions will be at Parametric Technology Corp., 140 Kendrick St., Needham, Mass.

From the North:

  1. Take Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

From the South:

  1. Take Route 128 North to Exit 18.
  2. Take a right onto Great Plain Avenue.
  3. Turn right onto Greendale Avenue.
  4. Turn right onto Kendrick Street.

From the East or West:

  1. Take the Massachusetts Turnpike to Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a Left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

Technical Publications Consensus Judging

The Technical Publicationsconsensus judging sessions will be at Middlesex Community College, 590 Springs Rd., Bedford, Mass.

From Route 128 South:

  1. Take Route 3 North to Exit 27 (Bedford/Concord Road, Billerica).
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.

From Route 128 North:

  1. Take Exit 31B (Routes 4/225) into Bedford.
  2. Follow Great Road until you pass Bedford Shopping Center on your right.
  3. Take the first right immediately past the shopping center onto Hillside Ave. toward the VA Medical Center (becomes Springs Rd.).
  4. Pass through VA Hospital grounds, continuing on Springs Road for just under a mile.
  5. The entrance to Middlesex Community College is on the right. Follow the signs to visitor parking.

From Route 3 South:

  1. Take Exit 27 (Bedford/Concord Road/Billerica)
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.
STC Boston Competitions - Directions to Judging Events

[an error occurred while processing this directive] [an error occurred while processing this directive]

Directions to Judging Events

The directions to the judging events are as follows:

Online Communication Orientation

The Online Communication orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Online Communication and Technical Art Consensus Judging

The Online Communication and Technical Art consensus judging sessions will be at Hewlett-Packard Co., 110 Spit Brook Rd., Nashua, NH.

From the South:

  1. Take Route 3 North into New Hampshire.
  2. Take Exit 1. At the end of the exit, take a left onto Spit Brook Rd.
  3. Go through one set of lights and bear right at the second set of lights. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

From the North:

  1. Take the Frederick E. Everett Turnpike south.
  2. Take Exit 1. At the bottom of the exit, take a right.
  3. Go to the next set of lights and bear right. You'll see a Compaq sign to the left. Follow the access road past the sign into the facility.
  4. Park in Lot B and proceed to the main entrance.

Technical Art Orientation

The Technical Art orientation session will be at Sun Microsystems, Inc., 1 Network Drive, Burlington, Mass. The directions are as follows:

From the Massachusetts Turnpike and Points West:

  1. Take the Mass. Pike/Route 90 East to 128 North/95 North.
  2. Follow Route 128 North to Exit 32A (Route 3 North).
  3. Take Route 3 North to Exit 26 (Route 62).
  4. At the end of the ramp, turn right.
  5. At the second set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  6. The main lobby is on the right as you face the traffic circle.

From Points North (Route 3):

  1. Take Route 3 South to Exit 26 (Route 62).
  2. At the lights at the end of the ramp, turn left.
  3. At the third set of traffic lights, turn right onto Network Drive and follow the signs to "Main Lobby" and "Visitor Parking."
  4. The main lobby is on the right as you face the traffic circle.

Technical Publications Orientation

The Technical Publications and Technical Art orientation sessions will be at Parametric Technology Corp., 140 Kendrick St., Needham, Mass.

From the North:

  1. Take Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

From the South:

  1. Take Route 128 North to Exit 18.
  2. Take a right onto Great Plain Avenue.
  3. Turn right onto Greendale Avenue.
  4. Turn right onto Kendrick Street.

From the East or West:

  1. Take the Massachusetts Turnpike to Route 128 South to Exit 19B, to Highland Avenue.
  2. At the next traffic light, take a Left onto Hunting Road.
  3. Turn left onto Kendrick Street.
  4. The PTC entrance is on the right.

Technical Publications Consensus Judging

The Technical Publicationsconsensus judging sessions will be at Middlesex Community College, 590 Springs Rd., Bedford, Mass.

From Route 128 South:

  1. Take Route 3 North to Exit 27 (Bedford/Concord Road, Billerica).
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.

From Route 128 North:

  1. Take Exit 31B (Routes 4/225) into Bedford.
  2. Follow Great Road until you pass Bedford Shopping Center on your right.
  3. Take the first right immediately past the shopping center onto Hillside Ave. toward the VA Medical Center (becomes Springs Rd.).
  4. Pass through VA Hospital grounds, continuing on Springs Road for just under a mile.
  5. The entrance to Middlesex Community College is on the right. Follow the signs to visitor parking.

From Route 3 South:

  1. Take Exit 27 (Bedford/Concord Road/Billerica)
  2. Turn left toward Bedford.
  3. Take a left at the first flashing light into Technology Park. Follow to the end and turn right (Orchard Street).
  4. The entrance to Middlesex Community College is immediately to your left. Follow the signs to visitors parking.
[an error occurred while processing this directive]